CIRCUIT BOARD REPAIR · RHODES, GREECE
Circuit board diagnosis and repair.
We find and repair component faults in phones, computers, consoles and professional equipment. Send the model and symptoms before shipping. We confirm the repair cost after diagnosis.
- Worldwide mail-in
- Power-fault diagnosis
- Quote before repair
- Previous repairs accepted
- Data handling agreed first
Find the service for your equipment.
Choose a category to see the equipment and faults we assess. Ask us to confirm acceptance before sending a board.
Smartphone logic boards
Power, charging, liquid-damage and short-circuit faults on iPhone and Android logic boards.
Computers, servers and GPUs
Motherboards and graphics cards with startup, power, charging or display faults.
Game console boards
Power, HDMI, charging and liquid-damage faults on PlayStation, Xbox and Switch.
HVAC, power and energy electronics
Control and power-board diagnosis. Safe isolation and final commissioning remain essential.
Marine and yacht electronics
Diagnosis of corrosion, power and display faults. Send equipment by courier after we confirm acceptance.
Repairs for shops and IT teams
Component-level repairs for your shop, with communication through you rather than your customer.
DIAGNOSIS AND REPAIR METHODS
The method depends on the fault. Diagnosis comes before component replacement.
- Microsoldering (0201, QFN, BGA)
- Hot-air rework
- BGA reballing
- Schematic & boardview diagnosis
- Power-rail & short-circuit isolation
- Thermal imaging
- Ultrasonic cleaning
- Chip-off work and repairs involving stored data
Power failures, shorts and damaged components.
A device that will not start can have several causes. We check the board to locate the fault before recommending a repair. Tell us if the problem is intermittent or if work has already been attempted.
- No power
- Shorted rails
- Charging failures
- Corrosion & liquid damage
- Intermittent faults
- Previous failed repair attempts
- Missing or damaged components
- Difficult diagnostic cases
For a fault not listed here, send the symptoms and model. We will check whether we can assess it.
Check your equipment before sending it.
We work on the board types below. The model, symptoms and condition determine whether we can accept the repair and what we need for testing.
Some boards cannot be repaired. Specialist equipment may also need manufacturer calibration or safety testing after repair. Send the model, symptoms and photos so we can discuss these limits before shipping.
Equipment type
- Smartphones
- iPhone, Android and other phone logic boards with no-power, charging, liquid, shorted-rail or previous repair faults.
- Computers & GPUs
- Laptop logic boards, desktop motherboards, workstations, servers and graphics cards with component-level failures.
- Consoles
- PlayStation, Xbox and Switch mainboards with power, charging, HDMI or other component faults.
- AC & control boards
- HVAC control boards, embedded controllers and specialist control electronics reviewed case by case before shipping.
- Marine electronics
- Navigation, control and power boards from boats and yachts, including units affected by corrosion or unavailable replacements.
- Medical & specialist equipment
- Non-life-support medical equipment, laboratory instruments and other specialist controllers. Acceptance depends on the equipment and required testing.
How the process works
Contact us before shipping. We will confirm whether we need the whole device, a module or just the board, and send the lab address and packing instructions.
Send details and photos
Include the model, symptoms, country and any previous work. Photos of both sides of the board help us identify it. If it is still installed, ask us what to send before removing it.
Receive shipping guidance
Once we accept the case, we provide the lab address and packing instructions. Use tracked, insured shipping and follow the customs guidance for your shipment.
Diagnosis before a quote
We inspect the board and check power rails, short circuits and relevant signal paths. Microscope, schematic and thermal checks help locate the cause. The repair quote follows diagnosis.
Approve repair and testing
Repair starts after you approve the quote. Work may involve replacing components, microsoldering or BGA rework. We then test against the reported fault. A newly discovered fault requires a revised quote.
Confirm the return shipment
We confirm the carrier and return cost in writing before dispatch. The board is packed with antistatic and impact protection and returned with tracking and insurance.
Typical turnaround is 7–14 business days from board arrival; unusual parts can take longer. Unsure what to send? Message us first.
Confirm what to send before booking a courier.
The model and fault determine what we need for testing. Sending an incomplete assembly or an unidentified board can delay diagnosis.
- 01
Contact first
Send a description before posting equipment. We need to confirm that we can assess it and agree the diagnosis terms.
- 02
Include model & fault details
Include the model number, what happens when it is used, and any liquid damage, impact or earlier repair. Photos should show the board numbers where possible.
- 03
Wait for guidance
We will confirm which parts to send, what to remove, and the delivery address. Keep any related parts available until we have discussed the case.
- 04
Pack carefully
Use an antistatic bag for the board, cushioning on all sides and a rigid box. Choose a tracked, insured service and use the customs guidance supplied for your case.
Diagnosis fees, timing and return shipping
These are the standard arrangements. We confirm the charges and shipping details for your case before work starts.
DIAGNOSIS
A fixed diagnosis fee, confirmed before work. Deducted from the repair price if you approve it.
TURNAROUND
Typically 7–14 business days from board arrival. Parts availability can extend this.
RETURN SHIPPING
Quoted for your destination and carrier before dispatch.
IF UNREPAIRABLE
Only the diagnosis fee applies if the board cannot be repaired.
We provide the shipping address after accepting the case. Customs requirements depend on the origin and destination; any applicable return duties are the recipient’s responsibility.
How we assess and repair your board
We locate the fault, explain the proposed work and test the repair. The equipment and available test setup determine what we can verify.
Diagnosis before replacement
We inspect the board and test its power and signal paths to identify the component or circuit causing the fault.
Repair at component level
Work can include replacing ICs, transistors, connectors and damaged pads rather than replacing the complete board.
Written repair approval
You receive a quote after diagnosis. Repair starts when you approve it; if another fault changes the work, we pause and issue a revised quote.
Shipping arranged per case
We accept equipment from Greece and abroad. We confirm what to send, how to pack it and the return-shipping cost.
Support for repair shops
Shops can refer individual boards or discuss repeat work. We communicate through the referring shop and can provide an unbranded report.
Discuss data requirements first
Tell us if stored data is the priority. We explain any repair work that requires access to storage before proceeding. Data recovery is not guaranteed.
Component-level repairs for your customers’ equipment
Repair shops, refurbishers, IT departments and resellers can send individual boards or discuss batches. We agree the board types, diagnosis fees and reporting before accepting work.
REPAIR SHOPS
Refer boards that require tools, time or component-level work you do not have available. You keep the customer relationship.
REFURBISHERS
Send the models, quantities and common faults before a batch. Diagnosis fees and findings help you decide which units to repair.
IT DEPARTMENTS
We assess workstation, server and fleet hardware, including equipment no longer supported by the vendor. Include its configuration and reported fault.
RESELLERS
We investigate stock that fails testing or returns with intermittent faults. Include the test results and previous repair history.
From the repair bench to repair intelligence.
Our work in advanced electronics diagnostics informs a second ambition: developing the software infrastructure that helps transform repair evidence into reusable technical knowledge.
Repair Lab
Advanced electronics diagnostics, fault isolation and component-level repair.
Explore Repair ServicesIntelligence Platform
Software and AI research focused on structured repair knowledge and diagnostic workflows.
In early development
Explore the PlatformPractical expertise informs product development. The product ambition is to make that expertise more reusable.
Find the fault before replacing the board.
Diagnosis, a repair quote, then your decision.
Send your repair enquiry
Send the model, fault description and photos if available. We review enquiries on weekdays and confirm whether we can assess the equipment and what to send before shipping.
Best for detailed cases & photos.
Opens your email app with a pre-filled template. Add any photos before sending.
Email assessmentNo email app? Copy the address into your webmail.
Include in your message
- Device type
- Brand and model
- Exact fault behavior
- Liquid damage / impact / previous repair
- Country
- Photos if available
B2B
Sending work for a shop or IT team? Include the board types, quantity and reporting requirements.